MCCB power circuit breaker with electronic trip unit e.industrial.ukm.800Re.800, 3P, 800A, 70kA, E.NEXT
-
Code:i0770025
Estimated Shipping
outside Varna starts at
€15.00
to Varna starts at
€15.00
to Varna starts at
€6.26
outside Varna starts at
€6.41
Quick Buy
Technical characteristics
Manufacturer: E.NEXT
Series: e.industrial.ukm.Re
Model: e.industrial.ukm.800Re.800
Item code: i0770025
Product type: Molded case circuit breaker (MCCB)
Size: 800Re
Number of poles: 3P
Switch type: Electronic
Rated current (In): 800 A
Rated operating voltage (Ue): 690 V AC
Current type: AC
Nominal frequency: 50 Hz
Rated insulation voltage (Ui): 1000 V
Impulse withstand voltage (Uimp): 12 kV
Electronic switch cut-off voltage: 12 V DC
Rated breaking capacity (Icu) at 415 V AC: 70 kA
Rated operational breaking capacity (Ics) at 400 V AC: 70 kA
Short-time withstand current (Icw) for 1 second: 10 kA
Application category: B
Nominal current setting range (Ir): (0.4–1) × In
Current setting positions (Ir): 315, 350, 400, 450, 500, 560, 630, 700, 760 and 800 A
Overload time delay (tr): 12, 60, 100, 150 s / OFF
Delayed short-circuit protection setting (Isd): 2–12 × Ir
Short circuit time delay (tsd): 0.06–0.3 s / OFF
Instantaneous short-circuit protection (Ii): 4–14 × Ir / OFF
Pre-fault indication setting (Ip): 0.7–1 × Ir / OFF
Maximum operating deviation: 15%
Light indication: Overload, over-alarm and load
Housing material: Heat-resistant, non-flammable polyamide, reinforced with glass fibers
Enclosure protection degree: IP30
Degree of protection of the connection terminals: IP00
Maximum dimensions of the connecting bar: 50×5 mm
Maximum cross-section of connecting cables: 2×240 mm²
Permissible conductor material: Copper and aluminum
Tightening torque of the connection terminals: 28 Nm
Tightening torque of mounting elements: 3 Nm
Power supply direction: From the top or bottom contacts
Mechanical wear resistance: minimum 20,000 cycles
Electrical durability: minimum 7,500 cycles
Maximum number of on/off cycles: 60 per hour
Width (A): 210 mm
Height (B): 280 mm
Depth (C): 103 mm
Maximum depth (C1): 155 mm
Mounting size (H): 243 mm
Interpole distance (F2): 70 mm
Dimensional tolerance: ±0.5 mm
Mounting: On a mounting panel plate
Minimum thickness of the metal mounting plate: 1.5 mm
Minimum thickness of the insulating mounting plate: 6 mm
Operating position: Vertical and horizontal with a deviation of no more than 5°
Operating temperature range: −30 to +70 °C
Climate performance: UHL3
Mechanical impact group: M1
Maximum relative humidity at 20 °C: 90% non-condensing
Pollution level: 3
Maximum altitude: 2000 m
Storage temperature: −45 to +70 °C
Average service life: 15 years
Compliance with standards: DSTU EN 60947-1, DSTU EN 60947-2, DSTU EN 61000-3-3, DSTU EN 61000-3-2
Disposal method: Handover to a specialized company
Country of origin: China
Warranty: 24 months
Equipment
- Power circuit breaker – 1 pc.
- Interphase barriers – 4 pcs.
- Set of fasteners for connecting external wires – 1 set.
- Set of fasteners for panel mounting – 1 set.
- Extended front connection terminals – 6 pcs.
- Operating instructions – 1 pc.
- Packaging – 1 pc.
Terminal protection covers are listed as an option in the package.
Installation and safety
Installation, connection and adjustment of the protective functions must be carried out by qualified electrical personnel with the power supply disconnected and in accordance with the manufacturer's instructions. The circuit breaker must be installed in an electrical panel with protection class not lower than I and degree of protection not lower than IP30. It is necessary to provide protection against accidental contact with the connection terminals.