Modular circuit breaker e.industrial.mcb.150.3.D125, 3p, 125A, D, 15kA, E.NEXT
Price excl. tax:
€53.00
Price inc. tax:
€63.60
-
Code:i0630012
The E.NEXT e.industrial.mcb.150.3.D125 modular circuit breaker is designed to protect low-voltage electrical networks and equipment from overload and short circuit, as well as for infrequent operational switching on and off of electrical circuits.
The model is three-pole (3P), with a rated current of 125 A, time characteristic D and a rated breaking capacity Icu 15 kA. Characteristic D makes it suitable for applications with high starting currents, such as electric motors, transformers and certain industrial consumers, provided that the protection characteristics are consistent with the specific installation.
The circuit breaker is designed to operate in alternating current networks at a rated operating voltage of 230/400 V AC and a frequency of 50 Hz. It has a current limiting class of 3, a nominal impulse withstand voltage of 6 kV and an insulation voltage of 500 V.
The device is mounted on a standard 35 mm DIN rail and allows the connection of conductors with a cross section of up to 50 mm². It supports connection to a FORK type comb busbar from both the top and bottom sides.
The e.industrial.mcb.150 series is designed for electrical distribution boards and industrial electrical installations where reliable protection of power circuits is required.
The model is three-pole (3P), with a rated current of 125 A, time characteristic D and a rated breaking capacity Icu 15 kA. Characteristic D makes it suitable for applications with high starting currents, such as electric motors, transformers and certain industrial consumers, provided that the protection characteristics are consistent with the specific installation.
The circuit breaker is designed to operate in alternating current networks at a rated operating voltage of 230/400 V AC and a frequency of 50 Hz. It has a current limiting class of 3, a nominal impulse withstand voltage of 6 kV and an insulation voltage of 500 V.
The device is mounted on a standard 35 mm DIN rail and allows the connection of conductors with a cross section of up to 50 mm². It supports connection to a FORK type comb busbar from both the top and bottom sides.
The e.industrial.mcb.150 series is designed for electrical distribution boards and industrial electrical installations where reliable protection of power circuits is required.
Estimated Shipping
outside Varna starts at
€7.82
to Varna starts at
€7.82
to Varna starts at
€3.62
outside Varna starts at
€3.77
Quick Buy
Just 4 fields to fill in
Technical characteristics
| Parameter | Value |
|---|---|
| Manufacturer | E.NEXT |
| Series | e.industrial.mcb.150 |
| Model | e.industrial.mcb.150.3.D125 |
| Item code | i0630012 |
| Device type | Modular circuit breaker |
| Number of poles | 3P |
| Rated current (In) | 125 A |
| Weather characteristic | D |
| Rated breaking capacity (Icu) | 15kA |
| Current limitation class | 3 |
| Rated operating voltage (Ue) | 230/400 V AC |
| Nominal DC voltage | 60 V DC per pole |
| Current type | AC (according to the technical table) |
| Nominal frequency | 50Hz |
| Application category | AC-22B |
| Rated insulation voltage (Ui) | 500V |
| Rated impulse withstand voltage (Uimp) | 6 kV |
| Connection with FORK type comb busbar | Above and below |
| Maximum cross-section of the connected wires | 50 mm² |
| Terminal tightening torque | 5 Nm |
| Installation | DIN rail 35 mm |
| Working position | Vertical or horizontal, with a deviation of up to 5° |
| Mechanical wear resistance | Minimum 20,000 cycles |
| Electrical wear resistance | Minimum 10,000 cycles |
| Degree of protection | IP20 |
| Degree of contamination | 2 |
| Operating temperature | From −25 to +40 °C |
| Climate performance | UHL4 |
| Maximum altitude | 2000 m |
| Table | Up to 660g |
| Compliance with standards | DSTU EN 60898-1; DSTU EN 60947-2 |
| Country of origin | China |
| Warranty | 12 months |