Modular circuit breaker e.mcb.stand.60.DC.1.C125, 1p, 125A, C, 6kA, DC E.NEXT
Price excl. tax:
€20.00
Price inc. tax:
€24.00
-
Code:s002223
The E.NEXT e.mcb.stand.60.DC.1.C125 modular circuit breaker is a single-pole device with a rated current of 125 A, tripping characteristic C and a rated breaking capacity of 6 kA. It is designed to protect electrical circuits from overload and short circuit.
The model is suitable for operation with direct and alternating current (AC/DC). The rated operating voltage for direct current is 125 V DC for one pole, and for alternating current the manufacturer specifies AC 230/400 V. The circuit breaker has a rated impulse withstand voltage of 6 kV and a rated insulation voltage of 1200 V.
The device is designed for installation on a standard 35 mm DIN rail. It supports the connection of conductors with a cross-section of up to 35 mm² and a terminal tightening torque of 2.5 Nm. The design has a mechanical wear resistance of at least 20,000 cycles and an electrical wear resistance of at least 10,000 cycles.
The wide temperature range from −40 to +70 °C allows use in electrical panels and installations under various operating conditions. The circuit breaker complies with the standards DSTU EN 60947-2 and DSTU EN 60898-2 and is guaranteed for 60 months.
The model is suitable for operation with direct and alternating current (AC/DC). The rated operating voltage for direct current is 125 V DC for one pole, and for alternating current the manufacturer specifies AC 230/400 V. The circuit breaker has a rated impulse withstand voltage of 6 kV and a rated insulation voltage of 1200 V.
The device is designed for installation on a standard 35 mm DIN rail. It supports the connection of conductors with a cross-section of up to 35 mm² and a terminal tightening torque of 2.5 Nm. The design has a mechanical wear resistance of at least 20,000 cycles and an electrical wear resistance of at least 10,000 cycles.
The wide temperature range from −40 to +70 °C allows use in electrical panels and installations under various operating conditions. The circuit breaker complies with the standards DSTU EN 60947-2 and DSTU EN 60898-2 and is guaranteed for 60 months.
Estimated Shipping
outside Varna starts at
€7.82
to Varna starts at
€7.82
to Varna starts at
€3.62
outside Varna starts at
€3.77
Quick Buy
Just 4 fields to fill in
Technical characteristics
| Parameter | Value |
|---|---|
| Manufacturer | E.NEXT |
| Series | e.mcb.stand.60.DC |
| Model | e.mcb.stand.60.DC.1.C125 |
| Item code | s002223 |
| Device type | Modular circuit breaker |
| Number of poles | 1P |
| Rated current (In) | 125 A |
| Weather characteristic | C |
| Rated breaking capacity (Icn) | 6kA |
| Current type | AC/DC |
| Rated operating voltage (Un) | 125V DC / 1P; 230/400V AC |
| Nominal frequency at AC | 50/60Hz |
| Application category | DC-22B; AC-22B |
| Rated insulation voltage (Ui) | 1200V |
| Rated impulse withstand voltage (Uimp) | 6 kV |
| Connection with FORK type comb busbar | No |
| Maximum cross-section of the connected wires | 35 mm² |
| Terminal tightening torque | 2.5 Nm |
| Installation | DIN rail 35 mm |
| Working position | Vertical or horizontal, with a deviation of up to 5° |
| Mechanical wear resistance | Minimum 20,000 cycles |
| Electrical wear resistance | Minimum 10,000 cycles |
| Degree of protection | IP20 |
| Degree of contamination | 2 |
| Operating temperature | From −40 to +70 °C |
| Climate performance | UHL3; UHL4 |
| Maximum altitude | 2000 m |
| Table | Up to 170g |
| Compliance with standards | DSTU EN 60947-2; DSTU EN 60898-2 |
| Country of origin | China |
| Warranty | 60 months |