Motor protection e.mp.pro.0.63 0.4-0.63A E.NEXT
Price excl. tax:
€22.42
43.85лв.
Price inc. tax:
€26.90
52.61лв.
-
Code:p004016
The automatic motor protection circuit breaker e.mp.pro.0.63, 0.4-0.63A is designed for starting and overload protection of small power electric motors. They are used as an emergency or main switch. They perform the following functions: electrothermal protection of three phases; protection against phase interruption. Provides short circuit protection, trigger setting Im=13 In. The nominal current of the electrical thermal protection is set using the regulator. The engine is started using the "start" button. Shutdown is done manually by pressing the "stop" button or automatically when the thermomagnetic protection or the minimum voltage is activated.
Estimated Shipping
outside Varna starts at
€3.88
to Varna starts at
€3.88
to Varna starts at
€2.74
outside Varna starts at
€2.85
Quick Buy
Just 4 fields to fill in
Technical characteristics
Article: p004016
Number of poles: 3
Range of operating current adjustment: 0.4…0.63 A
Impulse withstand voltage Uimp: 8 kV
Tightening torque of terminals: 1.2 Nm
Altitude above sea level: 2000 m
Insulation voltage Ui: 690 V
Rated operating voltage Ue: AC 400/660 V
Rated frequency: 50 Hz
Pollution degree: 2
Max. cross-section of connected wires: 6 mm²
Protection degree: IP20
Compliance with standards: DSTU EN 60947-2, EN 60947-4-1
Disposal method: transfer to a specialized company
Nom. breaking capacity limit Icu: 15 kA
Rated current In: 0.63 A
Wear resistance mech./el.: < 20000/10000 cycles
Rated operating breaking capacity Ics (AC 400 V): 7.5 kA
Max. switching frequency: 25 cycles/hour
Operating temperature range: -25…+40 °C
Protection class: 10A
Mounting: on DIN-rail 35 mm
Operating position: vertical or horizontal, with deviation ≤5°
Warranty: 12 months
Article: p004016
Number of poles: 3
Range of operating current adjustment: 0.4…0.63 A
Impulse withstand voltage Uimp: 8 kV
Tightening torque of terminals: 1.2 Nm
Altitude above sea level: 2000 m
Insulation voltage Ui: 690 V
Rated operating voltage Ue: AC 400/660 V
Rated frequency: 50 Hz
Pollution degree: 2
Max. cross-section of connected wires: 6 mm²
Protection degree: IP20
Compliance with standards: DSTU EN 60947-2, EN 60947-4-1
Disposal method: transfer to a specialized company
Nom. breaking capacity limit Icu: 15 kA
Rated current In: 0.63 A
Wear resistance mech./el.: < 20000/10000 cycles
Rated operating breaking capacity Ics (AC 400 V): 7.5 kA
Max. switching frequency: 25 cycles/hour
Operating temperature range: -25…+40 °C
Protection class: 10A
Mounting: on DIN-rail 35 mm
Operating position: vertical or horizontal, with deviation ≤5°
Warranty: 12 months